| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176 |
- /* SPDX-License-Identifier: LGPL-2.1 OR MIT */
- /*
- * rseq-arm.h
- *
- * (C) Copyright 2016-2022 - Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
- */
- /*
- * - ARM little endian
- *
- * RSEQ_SIG uses the udf A32 instruction with an uncommon immediate operand
- * value 0x5de3. This traps if user-space reaches this instruction by mistake,
- * and the uncommon operand ensures the kernel does not move the instruction
- * pointer to attacker-controlled code on rseq abort.
- *
- * The instruction pattern in the A32 instruction set is:
- *
- * e7f5def3 udf #24035 ; 0x5de3
- *
- * This translates to the following instruction pattern in the T16 instruction
- * set:
- *
- * little endian:
- * def3 udf #243 ; 0xf3
- * e7f5 b.n <7f5>
- *
- * - ARMv6+ big endian (BE8):
- *
- * ARMv6+ -mbig-endian generates mixed endianness code vs data: little-endian
- * code and big-endian data. The data value of the signature needs to have its
- * byte order reversed to generate the trap instruction:
- *
- * Data: 0xf3def5e7
- *
- * Translates to this A32 instruction pattern:
- *
- * e7f5def3 udf #24035 ; 0x5de3
- *
- * Translates to this T16 instruction pattern:
- *
- * def3 udf #243 ; 0xf3
- * e7f5 b.n <7f5>
- *
- * - Prior to ARMv6 big endian (BE32):
- *
- * Prior to ARMv6, -mbig-endian generates big-endian code and data
- * (which match), so the endianness of the data representation of the
- * signature should not be reversed. However, the choice between BE32
- * and BE8 is done by the linker, so we cannot know whether code and
- * data endianness will be mixed before the linker is invoked. So rather
- * than try to play tricks with the linker, the rseq signature is simply
- * data (not a trap instruction) prior to ARMv6 on big endian. This is
- * why the signature is expressed as data (.word) rather than as
- * instruction (.inst) in assembler.
- */
- #ifdef __ARMEB__
- #define RSEQ_SIG 0xf3def5e7 /* udf #24035 ; 0x5de3 (ARMv6+) */
- #else
- #define RSEQ_SIG 0xe7f5def3 /* udf #24035 ; 0x5de3 */
- #endif
- #define rseq_smp_mb() __asm__ __volatile__ ("dmb" ::: "memory", "cc")
- #define rseq_smp_rmb() __asm__ __volatile__ ("dmb" ::: "memory", "cc")
- #define rseq_smp_wmb() __asm__ __volatile__ ("dmb" ::: "memory", "cc")
- #define rseq_smp_load_acquire(p) \
- __extension__ ({ \
- rseq_unqual_scalar_typeof(*(p)) ____p1 = RSEQ_READ_ONCE(*(p)); \
- rseq_smp_mb(); \
- ____p1; \
- })
- #define rseq_smp_acquire__after_ctrl_dep() rseq_smp_rmb()
- #define rseq_smp_store_release(p, v) \
- do { \
- rseq_smp_mb(); \
- RSEQ_WRITE_ONCE(*(p), v); \
- } while (0)
- #define __RSEQ_ASM_DEFINE_TABLE(label, version, flags, start_ip, \
- post_commit_offset, abort_ip) \
- ".pushsection __rseq_cs, \"aw\"\n\t" \
- ".balign 32\n\t" \
- __rseq_str(label) ":\n\t" \
- ".word " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \
- ".word " __rseq_str(start_ip) ", 0x0, " __rseq_str(post_commit_offset) ", 0x0, " __rseq_str(abort_ip) ", 0x0\n\t" \
- ".popsection\n\t" \
- ".pushsection __rseq_cs_ptr_array, \"aw\"\n\t" \
- ".word " __rseq_str(label) "b, 0x0\n\t" \
- ".popsection\n\t"
- #define RSEQ_ASM_DEFINE_TABLE(label, start_ip, post_commit_ip, abort_ip) \
- __RSEQ_ASM_DEFINE_TABLE(label, 0x0, 0x0, start_ip, \
- (post_commit_ip - start_ip), abort_ip)
- /*
- * Exit points of a rseq critical section consist of all instructions outside
- * of the critical section where a critical section can either branch to or
- * reach through the normal course of its execution. The abort IP and the
- * post-commit IP are already part of the __rseq_cs section and should not be
- * explicitly defined as additional exit points. Knowing all exit points is
- * useful to assist debuggers stepping over the critical section.
- */
- #define RSEQ_ASM_DEFINE_EXIT_POINT(start_ip, exit_ip) \
- ".pushsection __rseq_exit_point_array, \"aw\"\n\t" \
- ".word " __rseq_str(start_ip) ", 0x0, " __rseq_str(exit_ip) ", 0x0\n\t" \
- ".popsection\n\t"
- #define RSEQ_ASM_STORE_RSEQ_CS(label, cs_label, rseq_cs) \
- RSEQ_INJECT_ASM(1) \
- "adr r0, " __rseq_str(cs_label) "\n\t" \
- "str r0, %[" __rseq_str(rseq_cs) "]\n\t" \
- __rseq_str(label) ":\n\t"
- #define RSEQ_ASM_CMP_CPU_ID(cpu_id, current_cpu_id, label) \
- RSEQ_INJECT_ASM(2) \
- "ldr r0, %[" __rseq_str(current_cpu_id) "]\n\t" \
- "cmp %[" __rseq_str(cpu_id) "], r0\n\t" \
- "bne " __rseq_str(label) "\n\t"
- #define __RSEQ_ASM_DEFINE_ABORT(table_label, label, teardown, \
- abort_label, version, flags, \
- start_ip, post_commit_offset, abort_ip) \
- ".balign 32\n\t" \
- __rseq_str(table_label) ":\n\t" \
- ".word " __rseq_str(version) ", " __rseq_str(flags) "\n\t" \
- ".word " __rseq_str(start_ip) ", 0x0, " __rseq_str(post_commit_offset) ", 0x0, " __rseq_str(abort_ip) ", 0x0\n\t" \
- ".word " __rseq_str(RSEQ_SIG) "\n\t" \
- __rseq_str(label) ":\n\t" \
- teardown \
- "b %l[" __rseq_str(abort_label) "]\n\t"
- #define RSEQ_ASM_DEFINE_ABORT(table_label, label, teardown, abort_label, \
- start_ip, post_commit_ip, abort_ip) \
- __RSEQ_ASM_DEFINE_ABORT(table_label, label, teardown, \
- abort_label, 0x0, 0x0, start_ip, \
- (post_commit_ip - start_ip), abort_ip)
- #define RSEQ_ASM_DEFINE_CMPFAIL(label, teardown, cmpfail_label) \
- __rseq_str(label) ":\n\t" \
- teardown \
- "b %l[" __rseq_str(cmpfail_label) "]\n\t"
- /* Per-cpu-id indexing. */
- #define RSEQ_TEMPLATE_CPU_ID
- #define RSEQ_TEMPLATE_MO_RELAXED
- #include "rseq-arm-bits.h"
- #undef RSEQ_TEMPLATE_MO_RELAXED
- #define RSEQ_TEMPLATE_MO_RELEASE
- #include "rseq-arm-bits.h"
- #undef RSEQ_TEMPLATE_MO_RELEASE
- #undef RSEQ_TEMPLATE_CPU_ID
- /* Per-mm-cid indexing. */
- #define RSEQ_TEMPLATE_MM_CID
- #define RSEQ_TEMPLATE_MO_RELAXED
- #include "rseq-arm-bits.h"
- #undef RSEQ_TEMPLATE_MO_RELAXED
- #define RSEQ_TEMPLATE_MO_RELEASE
- #include "rseq-arm-bits.h"
- #undef RSEQ_TEMPLATE_MO_RELEASE
- #undef RSEQ_TEMPLATE_MM_CID
- /* APIs which are not based on cpu ids. */
- #define RSEQ_TEMPLATE_CPU_ID_NONE
- #define RSEQ_TEMPLATE_MO_RELAXED
- #include "rseq-arm-bits.h"
- #undef RSEQ_TEMPLATE_MO_RELAXED
- #undef RSEQ_TEMPLATE_CPU_ID_NONE
|