| 1234567891011121314151617181920212223242526272829303132333435363738394041424344 |
- # SPDX-License-Identifier: GPL-2.0-only
- config QCOM_TSENS
- tristate "Qualcomm TSENS Temperature Alarm"
- depends on NVMEM_QCOM_QFPROM
- depends on ARCH_QCOM || COMPILE_TEST
- help
- This enables the thermal sysfs driver for the TSENS device. It shows
- up in Sysfs as a thermal zone with multiple trip points. Disabling the
- thermal zone device via the mode file results in disabling the sensor.
- Also able to set threshold temperature for both hot and cold and update
- when a threshold is reached.
- config QCOM_SPMI_ADC_TM5
- tristate "Qualcomm SPMI PMIC Thermal Monitor ADC5"
- depends on OF && SPMI && IIO
- select REGMAP_SPMI
- select QCOM_VADC_COMMON
- help
- This enables the thermal driver for the ADC thermal monitoring
- device. It shows up as a thermal zone with multiple trip points.
- Thermal client sets threshold temperature for both warm and cool and
- gets updated when a threshold is reached.
- config QCOM_SPMI_TEMP_ALARM
- tristate "Qualcomm SPMI PMIC Temperature Alarm"
- depends on OF && SPMI && IIO
- select REGMAP_SPMI
- help
- This enables a thermal sysfs driver for Qualcomm plug-and-play (QPNP)
- PMIC devices. It shows up in sysfs as a thermal sensor with multiple
- trip points. The temperature reported by the thermal sensor reflects the
- real time die temperature if an ADC is present or an estimate of the
- temperature based upon the over temperature stage value.
- config QCOM_LMH
- tristate "Qualcomm Limits Management Hardware"
- depends on ARCH_QCOM || COMPILE_TEST
- select QCOM_SCM
- help
- This enables initialization of Qualcomm limits management
- hardware(LMh). LMh allows for hardware-enforced mitigation for cpus based on
- input from temperature and current sensors. On many newer Qualcomm SoCs
- LMh is configured in the firmware and this feature need not be enabled.
- However, on certain SoCs like sdm845 LMh has to be configured from kernel.
|
