| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061 |
- # SPDX-License-Identifier: GPL-2.0
- obj-$(CONFIG_PCIE_DW) += pcie-designware.o
- obj-$(CONFIG_PCIE_DW_DEBUGFS) += pcie-designware-debugfs.o
- obj-$(CONFIG_PCIE_DW_HOST) += pcie-designware-host.o
- obj-$(CONFIG_PCIE_DW_EP) += pcie-designware-ep.o
- obj-$(CONFIG_PCIE_DW_PLAT) += pcie-designware-plat.o
- obj-$(CONFIG_PCIE_AMD_MDB) += pcie-amd-mdb.o
- obj-$(CONFIG_PCIE_BT1) += pcie-bt1.o
- obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o
- obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
- obj-$(CONFIG_PCIE_FU740) += pcie-fu740.o
- obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
- obj-$(CONFIG_PCIE_NXP_S32G) += pcie-nxp-s32g.o
- obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
- # ARM32 platforms use hook_fault_code() and cannot support loadable module.
- obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone.o
- # On non-ARM32 platforms, loadable module can be supported.
- obj-$(CONFIG_PCI_KEYSTONE_TRISTATE) += pci-keystone.o
- obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
- obj-$(CONFIG_PCI_LAYERSCAPE_EP) += pci-layerscape-ep.o
- obj-$(CONFIG_PCIE_QCOM_COMMON) += pcie-qcom-common.o
- obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
- obj-$(CONFIG_PCIE_QCOM_EP) += pcie-qcom-ep.o
- obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
- obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o
- obj-$(CONFIG_PCIE_ROCKCHIP_DW) += pcie-dw-rockchip.o
- obj-$(CONFIG_PCIE_SOPHGO_DW) += pcie-sophgo.o
- obj-$(CONFIG_PCIE_INTEL_GW) += pcie-intel-gw.o
- obj-$(CONFIG_PCIE_KEEMBAY) += pcie-keembay.o
- obj-$(CONFIG_PCIE_KIRIN) += pcie-kirin.o
- obj-$(CONFIG_PCIE_HISI_STB) += pcie-histb.o
- obj-$(CONFIG_PCI_MESON) += pci-meson.o
- obj-$(CONFIG_PCIE_TEGRA194) += pcie-tegra194.o
- obj-$(CONFIG_PCIE_UNIPHIER) += pcie-uniphier.o
- obj-$(CONFIG_PCIE_UNIPHIER_EP) += pcie-uniphier-ep.o
- obj-$(CONFIG_PCIE_VISCONTI_HOST) += pcie-visconti.o
- obj-$(CONFIG_PCIE_RCAR_GEN4) += pcie-rcar-gen4.o
- obj-$(CONFIG_PCIE_SPACEMIT_K1) += pcie-spacemit-k1.o
- obj-$(CONFIG_PCIE_STM32_HOST) += pcie-stm32.o
- obj-$(CONFIG_PCIE_STM32_EP) += pcie-stm32-ep.o
- # The following drivers are for devices that use the generic ACPI
- # pci_root.c driver but don't support standard ECAM config access.
- # They contain MCFG quirks to replace the generic ECAM accessors with
- # device-specific ones that are shared with the DT driver.
- # The ACPI driver is generic and should not require driver-specific
- # config options to be enabled, so we always build these drivers on
- # ARM64 and use internal ifdefs to only build the pieces we need
- # depending on whether ACPI, the DT driver, or both are enabled.
- obj-$(CONFIG_PCIE_AL) += pcie-al.o
- obj-$(CONFIG_PCI_HISI) += pcie-hisi.o
- ifdef CONFIG_ACPI
- ifdef CONFIG_PCI_QUIRKS
- obj-$(CONFIG_ARM64) += pcie-al.o
- obj-$(CONFIG_ARM64) += pcie-hisi.o
- obj-$(CONFIG_ARM64) += pcie-tegra194-acpi.o
- endif
- endif
|
