| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106 |
- # SPDX-License-Identifier: GPL-2.0
- obj-y += testcases.dtbo.o
- obj-$(CONFIG_OF_OVERLAY) += overlay.dtbo.o \
- overlay_0.dtbo.o \
- overlay_1.dtbo.o \
- overlay_2.dtbo.o \
- overlay_3.dtbo.o \
- overlay_4.dtbo.o \
- overlay_5.dtbo.o \
- overlay_6.dtbo.o \
- overlay_7.dtbo.o \
- overlay_8.dtbo.o \
- overlay_9.dtbo.o \
- overlay_10.dtbo.o \
- overlay_11.dtbo.o \
- overlay_12.dtbo.o \
- overlay_13.dtbo.o \
- overlay_15.dtbo.o \
- overlay_16.dtbo.o \
- overlay_17.dtbo.o \
- overlay_18.dtbo.o \
- overlay_19.dtbo.o \
- overlay_20.dtbo.o \
- overlay_bad_add_dup_node.dtbo.o \
- overlay_bad_add_dup_prop.dtbo.o \
- overlay_bad_phandle.dtbo.o \
- overlay_bad_symbol.dtbo.o \
- overlay_base.dtbo.o \
- overlay_gpio_01.dtbo.o \
- overlay_gpio_02a.dtbo.o \
- overlay_gpio_02b.dtbo.o \
- overlay_gpio_03.dtbo.o \
- overlay_gpio_04a.dtbo.o \
- overlay_gpio_04b.dtbo.o \
- overlay_pci_node.dtbo.o \
- overlay_bad_unresolved.dtbo.o
- # enable creation of __symbols__ node
- DTC_FLAGS_overlay += -@
- DTC_FLAGS_overlay_bad_phandle += -@
- DTC_FLAGS_overlay_bad_symbol += -@
- DTC_FLAGS_overlay_base += -@
- DTC_FLAGS_testcases += -@
- # suppress warnings about intentional errors
- DTC_FLAGS_testcases += -Wno-interrupts_property \
- -Wno-node_name_vs_property_name \
- -Wno-interrupt_map
- # Apply overlays statically with fdtoverlay. This is a build time test that
- # the overlays can be applied successfully by fdtoverlay. This does not
- # guarantee that the overlays can be applied successfully at run time by
- # unittest, but it provides a bit of build time test coverage for those
- # who do not execute unittest.
- #
- # The overlays are applied on top of static_base_1.dtb and static_base_2.dtb to
- # create static_test_1.dtb and static_test_2.dtb. If fdtoverlay detects an
- # error than the kernel build will fail. static_test_1.dtb and
- # static_test_2.dtb are not consumed by unittest.
- #
- # Some unittest overlays deliberately contain errors that unittest checks for.
- # These overlays will cause fdtoverlay to fail, and are thus not included
- # in the static test:
- # overlay_bad_add_dup_node.dtbo \
- # overlay_bad_add_dup_prop.dtbo \
- # overlay_bad_phandle.dtbo \
- # overlay_bad_symbol.dtbo \
- apply_static_overlay_1 := overlay_0.dtbo \
- overlay_1.dtbo \
- overlay_2.dtbo \
- overlay_3.dtbo \
- overlay_4.dtbo \
- overlay_5.dtbo \
- overlay_6.dtbo \
- overlay_7.dtbo \
- overlay_8.dtbo \
- overlay_9.dtbo \
- overlay_10.dtbo \
- overlay_11.dtbo \
- overlay_12.dtbo \
- overlay_13.dtbo \
- overlay_15.dtbo \
- overlay_16.dtbo \
- overlay_17.dtbo \
- overlay_18.dtbo \
- overlay_19.dtbo \
- overlay_20.dtbo \
- overlay_gpio_01.dtbo \
- overlay_gpio_02a.dtbo \
- overlay_gpio_02b.dtbo \
- overlay_gpio_03.dtbo \
- overlay_gpio_04a.dtbo \
- overlay_gpio_04b.dtbo
- apply_static_overlay_2 := overlay.dtbo
- DTC_FLAGS_static_base_1 += -Wno-interrupts_property \
- -Wno-node_name_vs_property_name \
- -Wno-interrupt_map
- static_test_1-dtbs := static_base_1.dtb $(apply_static_overlay_1)
- static_test_2-dtbs := static_base_2.dtb $(apply_static_overlay_2)
- dtb-$(CONFIG_OF_OVERLAY) += static_test_1.dtb static_test_2.dtb
|
