| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205 |
- /* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */
- /*
- * This file is provided under a dual BSD/GPLv2 license. When using or
- * redistributing this file, you may do so under either license.
- *
- * Copyright(c) 2018 Intel Corporation
- */
- #ifndef __INCLUDE_SOUND_SOF_HEADER_H__
- #define __INCLUDE_SOUND_SOF_HEADER_H__
- #include <linux/types.h>
- #include <uapi/sound/sof/abi.h>
- /** \addtogroup sof_uapi uAPI
- * SOF uAPI specification.
- * @{
- */
- /*
- * IPC messages have a prefixed 32 bit identifier made up as follows :-
- *
- * 0xGCCCNNNN where
- * G is global cmd type (4 bits)
- * C is command type (12 bits)
- * I is the ID number (16 bits) - monotonic and overflows
- *
- * This is sent at the start of the IPM message in the mailbox. Messages should
- * not be sent in the doorbell (special exceptions for firmware .
- */
- /* Global Message - Generic */
- #define SOF_GLB_TYPE_SHIFT 28
- #define SOF_GLB_TYPE_MASK (0xfUL << SOF_GLB_TYPE_SHIFT)
- #define SOF_GLB_TYPE(x) ((x) << SOF_GLB_TYPE_SHIFT)
- /* Command Message - Generic */
- #define SOF_CMD_TYPE_SHIFT 16
- #define SOF_CMD_TYPE_MASK (0xfffL << SOF_CMD_TYPE_SHIFT)
- #define SOF_CMD_TYPE(x) ((x) << SOF_CMD_TYPE_SHIFT)
- /* Global Message Types */
- #define SOF_IPC_GLB_REPLY SOF_GLB_TYPE(0x1U)
- #define SOF_IPC_GLB_COMPOUND SOF_GLB_TYPE(0x2U)
- #define SOF_IPC_GLB_TPLG_MSG SOF_GLB_TYPE(0x3U)
- #define SOF_IPC_GLB_PM_MSG SOF_GLB_TYPE(0x4U)
- #define SOF_IPC_GLB_COMP_MSG SOF_GLB_TYPE(0x5U)
- #define SOF_IPC_GLB_STREAM_MSG SOF_GLB_TYPE(0x6U)
- #define SOF_IPC_FW_READY SOF_GLB_TYPE(0x7U)
- #define SOF_IPC_GLB_DAI_MSG SOF_GLB_TYPE(0x8U)
- #define SOF_IPC_GLB_TRACE_MSG SOF_GLB_TYPE(0x9U)
- #define SOF_IPC_GLB_GDB_DEBUG SOF_GLB_TYPE(0xAU)
- #define SOF_IPC_GLB_TEST_MSG SOF_GLB_TYPE(0xBU)
- #define SOF_IPC_GLB_PROBE SOF_GLB_TYPE(0xCU)
- #define SOF_IPC_GLB_DEBUG SOF_GLB_TYPE(0xDU)
- /*
- * DSP Command Message Types
- */
- /* topology */
- #define SOF_IPC_TPLG_COMP_NEW SOF_CMD_TYPE(0x001)
- #define SOF_IPC_TPLG_COMP_FREE SOF_CMD_TYPE(0x002)
- #define SOF_IPC_TPLG_COMP_CONNECT SOF_CMD_TYPE(0x003)
- #define SOF_IPC_TPLG_PIPE_NEW SOF_CMD_TYPE(0x010)
- #define SOF_IPC_TPLG_PIPE_FREE SOF_CMD_TYPE(0x011)
- #define SOF_IPC_TPLG_PIPE_CONNECT SOF_CMD_TYPE(0x012)
- #define SOF_IPC_TPLG_PIPE_COMPLETE SOF_CMD_TYPE(0x013)
- #define SOF_IPC_TPLG_BUFFER_NEW SOF_CMD_TYPE(0x020)
- #define SOF_IPC_TPLG_BUFFER_FREE SOF_CMD_TYPE(0x021)
- /* PM */
- #define SOF_IPC_PM_CTX_SAVE SOF_CMD_TYPE(0x001)
- #define SOF_IPC_PM_CTX_RESTORE SOF_CMD_TYPE(0x002)
- #define SOF_IPC_PM_CTX_SIZE SOF_CMD_TYPE(0x003)
- #define SOF_IPC_PM_CLK_SET SOF_CMD_TYPE(0x004)
- #define SOF_IPC_PM_CLK_GET SOF_CMD_TYPE(0x005)
- #define SOF_IPC_PM_CLK_REQ SOF_CMD_TYPE(0x006)
- #define SOF_IPC_PM_CORE_ENABLE SOF_CMD_TYPE(0x007)
- #define SOF_IPC_PM_GATE SOF_CMD_TYPE(0x008)
- /* component runtime config - multiple different types */
- #define SOF_IPC_COMP_SET_VALUE SOF_CMD_TYPE(0x001)
- #define SOF_IPC_COMP_GET_VALUE SOF_CMD_TYPE(0x002)
- #define SOF_IPC_COMP_SET_DATA SOF_CMD_TYPE(0x003)
- #define SOF_IPC_COMP_GET_DATA SOF_CMD_TYPE(0x004)
- #define SOF_IPC_COMP_NOTIFICATION SOF_CMD_TYPE(0x005)
- /* DAI messages */
- #define SOF_IPC_DAI_CONFIG SOF_CMD_TYPE(0x001)
- #define SOF_IPC_DAI_LOOPBACK SOF_CMD_TYPE(0x002)
- /* stream */
- #define SOF_IPC_STREAM_PCM_PARAMS SOF_CMD_TYPE(0x001)
- #define SOF_IPC_STREAM_PCM_PARAMS_REPLY SOF_CMD_TYPE(0x002)
- #define SOF_IPC_STREAM_PCM_FREE SOF_CMD_TYPE(0x003)
- #define SOF_IPC_STREAM_TRIG_START SOF_CMD_TYPE(0x004)
- #define SOF_IPC_STREAM_TRIG_STOP SOF_CMD_TYPE(0x005)
- #define SOF_IPC_STREAM_TRIG_PAUSE SOF_CMD_TYPE(0x006)
- #define SOF_IPC_STREAM_TRIG_RELEASE SOF_CMD_TYPE(0x007)
- #define SOF_IPC_STREAM_TRIG_DRAIN SOF_CMD_TYPE(0x008)
- #define SOF_IPC_STREAM_TRIG_XRUN SOF_CMD_TYPE(0x009)
- #define SOF_IPC_STREAM_POSITION SOF_CMD_TYPE(0x00a)
- #define SOF_IPC_STREAM_VORBIS_PARAMS SOF_CMD_TYPE(0x010)
- #define SOF_IPC_STREAM_VORBIS_FREE SOF_CMD_TYPE(0x011)
- /* probe */
- #define SOF_IPC_PROBE_INIT SOF_CMD_TYPE(0x001)
- #define SOF_IPC_PROBE_DEINIT SOF_CMD_TYPE(0x002)
- #define SOF_IPC_PROBE_DMA_ADD SOF_CMD_TYPE(0x003)
- #define SOF_IPC_PROBE_DMA_INFO SOF_CMD_TYPE(0x004)
- #define SOF_IPC_PROBE_DMA_REMOVE SOF_CMD_TYPE(0x005)
- #define SOF_IPC_PROBE_POINT_ADD SOF_CMD_TYPE(0x006)
- #define SOF_IPC_PROBE_POINT_INFO SOF_CMD_TYPE(0x007)
- #define SOF_IPC_PROBE_POINT_REMOVE SOF_CMD_TYPE(0x008)
- /* trace */
- #define SOF_IPC_TRACE_DMA_PARAMS SOF_CMD_TYPE(0x001)
- #define SOF_IPC_TRACE_DMA_POSITION SOF_CMD_TYPE(0x002)
- #define SOF_IPC_TRACE_DMA_PARAMS_EXT SOF_CMD_TYPE(0x003)
- #define SOF_IPC_TRACE_FILTER_UPDATE SOF_CMD_TYPE(0x004) /**< ABI3.17 */
- #define SOF_IPC_TRACE_DMA_FREE SOF_CMD_TYPE(0x005) /**< ABI3.20 */
- /* debug */
- #define SOF_IPC_DEBUG_MEM_USAGE SOF_CMD_TYPE(0x001)
- /* test */
- #define SOF_IPC_TEST_IPC_FLOOD SOF_CMD_TYPE(0x001)
- /* Get message component id */
- #define SOF_IPC_MESSAGE_ID(x) ((x) & 0xffff)
- /* maximum message size for mailbox Tx/Rx */
- #define SOF_IPC_MSG_MAX_SIZE 384
- /*
- * Structure Header - Header for all IPC structures except command structs.
- * The size can be greater than the structure size and that means there is
- * extended bespoke data beyond the end of the structure including variable
- * arrays.
- */
- struct sof_ipc_hdr {
- uint32_t size; /**< size of structure */
- } __packed;
- /*
- * Command Header - Header for all IPC commands. Identifies IPC message.
- * The size can be greater than the structure size and that means there is
- * extended bespoke data beyond the end of the structure including variable
- * arrays.
- */
- struct sof_ipc_cmd_hdr {
- uint32_t size; /**< size of structure */
- uint32_t cmd; /**< SOF_IPC_GLB_ + cmd */
- } __packed;
- /*
- * Generic reply message. Some commands override this with their own reply
- * types that must include this at start.
- */
- struct sof_ipc_reply {
- struct sof_ipc_cmd_hdr hdr;
- int32_t error; /**< negative error numbers */
- } __packed;
- /*
- * Compound commands - SOF_IPC_GLB_COMPOUND.
- *
- * Compound commands are sent to the DSP as a single IPC operation. The
- * commands are split into blocks and each block has a header. This header
- * identifies the command type and the number of commands before the next
- * header.
- */
- struct sof_ipc_compound_hdr {
- struct sof_ipc_cmd_hdr hdr;
- uint32_t count; /**< count of 0 means end of compound sequence */
- } __packed;
- /**
- * OOPS header architecture specific data.
- */
- struct sof_ipc_dsp_oops_arch_hdr {
- uint32_t arch; /* Identifier of architecture */
- uint32_t totalsize; /* Total size of oops message */
- } __packed;
- /**
- * OOPS header platform specific data.
- */
- struct sof_ipc_dsp_oops_plat_hdr {
- uint32_t configidhi; /* ConfigID hi 32bits */
- uint32_t configidlo; /* ConfigID lo 32bits */
- uint32_t numaregs; /* Special regs num */
- uint32_t stackoffset; /* Offset to stack pointer from beginning of
- * oops message
- */
- uint32_t stackptr; /* Stack ptr */
- } __packed;
- /** @}*/
- #endif
|